Asus sabertooth 990fx red cpu led4/30/2023 ![]() The P6X58D-E uses an AMI bios, here are the beep codes. The fact that you lost 2 hard drives makes me even more sure that this is a reverse polarity issue, not dust shorts. I'll bet the wires coming out of the ends are in a different arrangement. Take a close look at the old cables and the new cables. Modular cables are not interchangeable! Most use the same 6 pin connectors to connect to the PSU, but have completely arbitrary pinouts which vary depending on the vendor. Did you leave the cables from the older power supply in place? It sounds like you had a modular power supply, and you new power supply is also modular. Update: After switching to the cables provided with the PSU I am now able to boot. In any case, the original question still stands - how do you interpret the patterns? Who knows why? Unfortunately it looks like one SSD and one HDD were fried by dust shorts in the process - The SSD is not detected and the machine refuses to start if I connect the power plug to the HDD (I tried multiple cables). The 24+8 motherboard+CPU connectors are all connected. It should not be a power problem, since the new PSU has more wattage than the old one, and it's running the same hardware. That is, if I press it there's no beep, DRAM_LED light or fans running. If I attach any other cables to the PSU (SATA, GPU) the power button stays red but doesn't do anything. Having a reference for all of these would be extremely useful. I've tried pressing the MemOK! button with miscellaneous configurations of memory (1st, 2nd and 3rd slot), and sometimes get three blinks, sometimes two and sometimes one. DRAM_LED lights up three times then goes dark.the speaker plays a nerve-shattering single continuous beep.the power button on my ASUS P6X58D-E motherboard always stays red when power is on,.My specific issue is that after changing the PSU (the old one didn't die, but had a power button issue) to a Corsair AX760 and connecting only the CPU and 24 pin motherboard cables: Regardless of the CPU fault LED being Lit I am pretty sure now that the Mother board is the problem the Fault the replacement tested FX8350 did not work.What are the canonical meanings of the different DRAM_LED, power button and beep patterns prior to BIOS POST on Asus motherboards? My manual and miscellaneous web searches have turned up nothing but vague notions in forums. ![]() Both AM3+ and transfer everything across pretty cheap but I would like to know what is happening. or maybe the Bios chip is corrupted/failed I can buy a bullet proof Giggabite GA series ot ASUS Sabertooth 990FX. I will leave things as they are for 24 hours see what other suggestion come in I am feeling that the fault could be a capacitor or some other part of the CPU circuit on the Board that is so close to the CPU it indicates as a CPU Fault. it was connected I removed it and tested it it's working. Another strange oddity is that the motherboard is designed to not boot up if the speaker is not connected. ![]() I have found numerous occurrences of my problem on youtube but people only appear to be able to confirm what has happened not why. ASUS and AMD have a symbiotic relationship as companies it is why their products work so well together. The power to MB green light comes on and the on/ off button illuminates that is all I get so for some reason the CPU so power is getting to the board. In my case the single beep does not occur the fan on the CPU starts as normal. When I turn on the normal result is a single Beep this is normal for all computers as you know it is the POST ( Power on Self Test) beep. The Board it's self has a Red fault LED that if lit indicates a general Motherboard fault this is not lit. The ASUS M5A99X motherboard is self diagnostic so just below and to the right of the CPU is a Red LED that if lit indicates a CPU fault or the section of the board directly associated with it.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |